Featuring Snapcat™ - Photocatalytic Oxidation

Our Snapcat™ add-on strips will snap onto any brand of UV light that is of the dual tube U-shaped design, not just CaluTech's.

If you hate to read, here is the short story.  Snapcat strips react with the UV-C light to produce radicals that get carried into the air thru your duct system.  The particles attach themselves to pathogens in the air, carpet, walls, or any place the pathogens may be that can come in contact with the air.  The radicals then destroy the pathogens, rendering them incapable of reproducing, thus stopping them in their tracks from growing.  If you have ever walked along a sandy beach by a seashore, you have noticed the same fresh air smell.  We are reproducing the exact same scenerio indoors like the sun does outside.  Totally safe and no side affects.

Heterogeneous Photocatalytic oxidation (PCO) eliminates concentrations of organic contaminants from gaseous effluents by converting them to safe substances such as water or carbon dioxide. Our air purifier with germicidal protection and Snapcat™ photocatalytic oxidation removes musty odors, pet dander, viruses, mold, bacteria, and other airborne pathogens. Eliminates VOCs (Volatile Organic Compounds). Irradiates the furnace - air conditioning coils and makes them like new again, increasing air flow and efficiency. Helps clean and sanitize air ducts and kill mold while eliminating odors throughout the entire home.

If you already own a CaluTech UV air system you can easily add the Snapcat™ snap-on strips to your existing UV lamps, or add Snapcat™ at your next lamp change. Snapcat™ is a Patent Pending product which allows a simple, yet effective way to utilize catalytic oxidation technology in your home. The Photocatalytic strips are different than some UV air purifier models made by others, which use a simple piece of titanium metal in the attempt to produce a catalyst oxidation process. Titanium Dioxide, or Titania (chemical name ti02) is a product not produced by nature and not made from titanium metal. It is extracted mainly from rutile beach sand and when it is used in the Snapcat™ process it becomes a powerful oxidizer which reacts with UV light below 385nm. The Snapcat™ strips are manufactured and coated with a very pure titanium dioxide which is baked on the Snapcat™ strip. This coating lasts for 5 years, or more. Adding Snapcat™ technology to CaluTech's UV air purification gives you a superior method for air purification. UV-C germicidal light produced by the CaluTech product line eliminates viruses, mold, bacteria and other living airborne pathogens by modifying the living organism's DNA, preventing them from reproducing, and causing the organisms to die. Adding Snapcat™ strips to our UV air purifiers causes a reaction between the UV light and the strips. This reaction is called Heterogeneous Photocatalysis, or quite simply 'Photocatalytic Oxidation' / PCO Technology. The PCO process generates hydroxyl radicals which are among the most powerful oxidizers. Like UV-C light these oxidizers destroy microorganisms in the air, but the advantage is the ability for these oxidizers to reach living organisms in places where the UV-C light cannot reach. In addition, because titanium dioxide is a semiconductor it absorbs UV light and breaks down volatile organic compounds (VOCs) such as odors and gases like carbon monoxide or nitrous oxide. These gases are converted by the Photocatalytic process into carbon dioxide and water, rendering them completely harmless. All you have left is pure clean air! Breathe clean again, breathe crisp clean air.

References & Research on Photocatalytic Oxidation

• BUY IT NOW